NARROW 3/4-INCH SHAKER CABINET DOOR
Palmerston Cabinet Door
A crisp thin Shaker profile with narrow 3/4-inch rails and stiles, square corners and a recessed centre panel.
Screen colours are approximate. Confirm your final colour with a physical sample.
Enter your finished door or drawer-front size, quantity and finish to calculate your estimated price. Add each different size to build your complete order.
Your Door Order
| Style | Size | Finish | Qty | Price / Piece | Total |
|---|
Review Your Order
Review the complete order before submitting it to Miter5. No payment is taken through this calculator. Miter5 will confirm dimensions, profile availability, finish and production details before accepting an order.
A Narrow-Frame Shaker Door for Modern and Transitional Cabinetry
Palmerston is a made-to-order thin Shaker cabinet door and drawer-front style defined by narrow 3/4-inch rails and stiles, square 90-degree corners and a clean recessed centre panel. Its slimmer frame gives the familiar Shaker profile a crisp, contemporary proportion without losing its balanced architectural character.
The narrow frame works especially well in modern and transitional kitchens, bathroom vanities, custom closets, laundry rooms, mudrooms, wall units and built-in cabinetry. It is also a practical choice for refacing and replacement-door projects where a traditional wide-frame Shaker can feel visually heavy.
Matching Palmerston drawer fronts carry the same narrow-frame, recessed-panel profile across base cabinets and storage units, keeping doors and drawers visually consistent throughout the installation.
Door Details
Door style: Thin Shaker cabinet door with narrow 3/4-inch rails and stiles
Available as: Cabinet doors and coordinating drawer fronts
Profile look: Crisp, square-cornered and contemporary Shaker
Material: High-quality paint-grade HDF
Sizing: Made to order
Finish options: Painted finishes and custom colour selections
Suitable for: Kitchens, vanities, closets, laundry rooms, mudrooms, wall units and built-in cabinetry
Service area: Toronto and the GTA
Palmerston is suited to cabinetry that needs the definition of a recessed-panel Shaker door with a slimmer, more architectural frame than a traditional wide-rail profile.
Made to Order for New Cabinetry, Refacing and Replacements
Palmerston doors and matching drawer fronts are produced to the finished dimensions required for each project. They can be specified for complete new cabinetry, replacement-door work or cabinet refacing where standard retail sizes do not fit.
For work that must coordinate with existing cabinetry, provide finished measurements together with a sample door, clear photographs or drawings. Miter5 can review the information to confirm whether Palmerston’s standard narrow 3/4-inch frame and recessed-panel profile is suitable or whether a custom variation is required.
Paint colours can be selected to coordinate with cabinetry, walls, countertops and other finishes. Screen colours are approximate, so confirm the final selection with a physical paint sample before production.
PALMERSTON THIN-SHAKER QUESTIONS
Questions About the Palmerston Profile
How does Palmerston differ from a traditional wide-frame Shaker door?
Palmerston retains the square corners and recessed centre panel of a classic Shaker door, but uses narrow 3/4-inch rails and stiles. The slimmer frame creates a lighter, more contemporary proportion while preserving the clean shadow lines associated with Shaker cabinetry.
Can Palmerston’s narrow frame be used on matching drawer fronts?
Yes. Palmerston can be made to order as cabinet doors and coordinating drawer fronts so the same narrow-frame profile continues across the installation. Provide the finished dimensions and quantities for every piece; smaller drawer-front dimensions and any boring, colour or project-specific requirements can be confirmed during order review.
Order Palmerston Cabinet Doors and Drawer Fronts
Use the calculator above to enter each finished width, height, quantity and finish. Add every required size to the order list, then submit the complete set for review. Taxes, delivery, hinge boring, special colours and other project-specific options are confirmed before production.
Miter5 manufactures locally in Canada for homeowners, contractors, designers, renovators and cabinet shops throughout Toronto and the GTA.
START YOUR CABINET DOOR ORDEREXPLORE THE COLLECTION
